Description
Double-shell pipe connector with three outlets for connecting two pipes with two 90° angles. A continuous pipe and a pipe end are connected to a T using this pipe connector by clamping two half-shells. The continuous pipe and the pipe end are drilled three times with a diameter of 9.5 mm. Screws and sleeves are connected to each other through the holes. The pipe connector is therefore suitable for larger tensile forces.
Further information
Size in mm: 35
Bivalve: Yes
Material: Aluminum
Drilling of the pipe required: Yes
Information on surfaces and coatings
You can get our tube connectors in six different surface qualities. Through the targeted selection of surface finishes, you always get the right quality from us. Starting with simple, functional or colour-coated industrial railings for machine and plant construction or large-scale industrial plants to high-quality surfaces for use in buses and trains as well as in shipbuilding.
Depending on the quality requirements, our pipe connectors are available in the following surface finishes:
- raw
- trowal polished
- highly polished
- technically anodized E6 / EV1
- decoratively anodized E5 / EV1
- Coloured plastic powder-coated according to RAL